Microscope Lamps and Accessories
Electron Microscopy Sciences EMS Dial A Grid-N-Block Storage
24 slots labeled with letters from A-X where the grids can be stored and rotated for easy access as well as 3 additional cavities for block storage.
Electron Microscopy Sciences Whipple Grid Graticle NE29, 27 mm, 100 squares in 7 mm
Originally designed for water particle analysis, but may be used for other aspects of particle counting. Grid showed: Ratio of full square to smallest is 50:1. Area is 2500:1. Reference: Microscopy of Drinking Water.
Size: 27 mm
Divisions: 100 squares in 7 mm
Electron Microscopy Sciences EMS Platinum Aperture with 50 µm hole, 0.06 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 50 µm
O.D.: 6.35 mm
Thickness: 0.06 mm
Chem Service Inc Crotonaldehyde Solution | 4170-30-3 | MFCD00007003 | 1mL
This item has a minimum order quantity of 2 per supplier requirements
Crotonaldehyde Solution | MW: 70.09 | 4170-30-3 | MFCD00007003 | 1mL
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SH Hard Bond, 3 µm Particles, 300 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 3 µm
Diameter: 300 mm
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SM Medium-Hard Bond, 3 µm Particles, 350 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 3 µm
Diameter: 350 mm
Electron Microscopy Sciences Cambridge Universal SEM Stub Interchangeable Carousel
Universal adapter to fit Cambridge SEMs which then accepts interchangeable multi carousel, single pin stubs, or re-entrant stubs. Holds 8 pin stubs.